Aluminium 7075 Sheets and plates.
AMS 4123, AMS-QQ-A225/9, ASTM B211.
Aluminium 7075-t6 AIZnMgCu1.5 - F52 Sheets,Plates & Blocks available.
Temper: 7075-0, 7075-T6, 7075-T73, 7075-T76, 7075-T651, 7075-T7351, 7075-T7651
Bare: QQ-A-250/12, QQ-A-250/24, AMS 4044, AMS 4055, AMS 4078
Clad: QQ-A-250/13, QQ-A-250/25, AMS 4088, AMS 4049, BMS 7-302
We are aluminium 7075,AMS 4123 ASTM B211 sheets,plates manufacturers,suppliers and exporters in india. Aluminium 7075 Plate’s strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated.Aluminium 7075 Plate is one of the highest strength aluminum alloys available.
7075 Aluminium sheets is used where high strength is critical and where good corrosion resistance is not important. It is classed as a very high strength aluminium aerospace alloy with superior stress corrosion resistance.
7075 aluminium alloy's composition roughly includes 5.6–6.1% zinc, 2.1–2.5% magnesium, 1.2–1.6% copper, and less than a half percent of silicon, iron, manganese, titanium, chromium, and other metals. It is produced in many tempers, some of which are 7075-0, 7075-T6, 7075-T651.
Aluminium 7075 Sheet & Plates Equivalent Grades :
| UNS | EN | DIN,WNr | JIS | AFNOR | ISO | BS | GOST |
| A97075 | ENAW-AlZn5.5MgCu EN AW-7075 |
3.4365 AlZnMgCu1.5 |
7075 | 7075 A-Z5GU | AlZn6MgCu | 7075 L95 L96 | V95 |
aluminium 7075 chemical composition Sheets & Plates :
| Grade | Element | |||||||
|---|---|---|---|---|---|---|---|---|
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | |
| 7075 | 0.40 | 0.50 | 1.2/2.0 | 0.30 | 2.1/2.9 | 0.18/0.28 | 5.1/6.1 | 0.20 |
Mechanical Properties Of Aluminium Alloy 7075 Sheets & Plates:
| Properties | Metric |
|---|---|
| Tensile strength | 83-73 Ksi |
| Yield strength | 73-63 Ksi |
| Hardness Brinell | 150 |
| Elongation | 13-11% |
Physical Composition Of Aluminium Alloy 7075 Sheets & Plates :
| Properties | Metric |
|---|---|
| Density | 2.80 Mg/m³ |
| Melting point | 532°C - 635 °C |
| Specific Heat (212 °F / 100°C | 960 J/kg-°K |
Features
- Excellent for anodizing
- Corrosion Resistance
- Good Tensile Strength
- Excellent Heat Resistant
- Toughness
- Good acceptance
- Excellent corrosion resistance
- Best in class strength,
- Dimensional stability,
- Good anodization response
Applications
- Aircraft
- Structure Screw Machine Products
- Housings,
- Hydraulic Parts
- Automotive
- marineindustries
- Renewable Energy
- Mass Transportation